9 Essential Accessories For the Fujifilm X System or Window Washing the Xpro

by davidbrommer

Window Washing

Attention Suspect Photography Fans- Finding Photographic Style and Composition in NYC 4 Day Intensive Workshop April 17th to April 20th 2014. Early Registration Discount By March 1st.

The Fujifilm Xpro 1 is a superb camera and many photographers are singing its praise while making great images from this unique and high quality digital rangefinder. There are a few pieces of gear that can really enhance the Xpro1 and this post is dedicated them. After using the camera for a year and a half and having a load of friends also indulge in the Xpro1 I built this list with authority. Some of it can apply to the XE1 and XE2 and some can’t, I’ll let you know so all Fujifilm X system shooters can benefit from these suggestions. So here we go, the 9 essentials.

#1 The Domke 1” Gripper Strap with QR. The strap that Fujifilm supplies is worthless. While looking nice and being leather it is too thin and slips off your shoulder every 3 steps you take. The Gripper is thus named because it has two rows of rubber woven into the strap and the rubber keeps the strap from falling off your shoulder.  The Gripper Strap has quick releases so it’s easy to remove for tripod shooting. The finish of the strap is also attractive and stealthy; it looks good and doesn’t get in the way. It comes with leather protectors so it doesn’t scratch the side of the camera and also features a nice leather accent. Anything that is this functional and under $20 bux is a winner. Works with Xpro, XE1 & XE2.

#2 The  Hand Grip HG-Xpro1 This is sort of a no-brainer. It gives you a better grip and brings the tripod socket to the middle of the camera, not off to the side. Yes, it’s a bit annoying to take on and off when you want to access the battery or memory card, but its easy to remove and put back on. I keep it on about 80% of the time for standard walk about shooting and when I want to go low profile (shooting discreet at performances) I simply take it off. It has a nice thick rubberness to it, and when using large lenses such as the Zeiss 12mm, Fujifilm 14 or any of the zooms it simply shines. I like the feel of the camera without it, but really like the feel with it. It also has a rubber bottom so it can’t scratch surfaces when you put the camera down and keeps it from slipping off slick surfaces. Coming in at $79 it wont break the bank either. The link I provided will show you both grips.

#3 Blue LocTite for the Eyepiece. A very small drop of blue Loctight is great to keep the stock eyepiece from falling off. I have replaced mine once already and it’s costly! Don’t use the red Loctight, that’s permanent! The blue is made to resist unscrewing but is not permanent for servicing. Make sure you shake the tube well before application and once again, just a small drop or two. You can find this at your local hardware store. Only Xpro1 users need this, the viewfinder in the XE is cheesy.

#4 Gaffers Tape the hood cap that Fujifilm provides. I lost my hood cap in about.. 12 seconds. Take gaffers tape and line the inside of the hood with about 2 layers of the tape, it just makes the lens cap fit more snug. Besides, you should always have a roll of gaff tape handy for just about anything. Use it to gaff tape the Fujifilm logo when shooting in sketchy locations (an old photojournalist trick).

#5 LCD Screen Protector: Your XPro1 is a constant companion, its right place is around your shoulder going where ever you do. It’s bound to get beat up, and that’s ok, because it’s a tough camera. But man, that LCD cover is soft! Look at it the wrong way and it gets scratched. Get on this one right away and put a cover on it! I know, you’re discerning, so try this Aegis Professional Multi-Coat Glass cover, it’s made from Schott glass and is only $30 bucks! It is easy to install and its tougher than the stock glass on the Xpro1 LCD.

#6 Soft Release Button: Since the Xpro1 has a standard cable release, they can accept a broad range of soft release buttons. Essentially a more ergonomic button that screws into your shutter release they feel nice, and make the camera more sensitive to activate auto focus and

#7 Camera Bags: There are only two to consider. Going stealth and relatively inexpensive the Domke F5XB is your huckleberry. It was designed primarily as a rangefinder bag and can hold the camera with a lens mounted on it and two more lenses. It’s canvas and discreet, you can wear it over shoulder or on the hip with it’s integrated belt loop. I like the black, but you can get it in olive or tan. If you never had a Domke bag you’re in for a treat, they age very well and at $70 dollars, wont break the bank so you can buy more lenses as they are released.


Now if you have some $$$ to spare and are looking for something very special, look no further than the Billingham Hadley Small Shoulder bag. It’s like the Louis Vuitton of camera bags, made with a luxury canvas and gorgeous leather trim this is a camera bag that you can take to museum openings, the opera, or to Pakistan. Easily handles a body with lens and two extra lenses like the Domke, but also has two deep large pockets at the front for important extra stuff such as batteries and a hood loupe. Hiding behind the camera insert is an area that you can fit a iPad tightly or a iPad Mini easily. I personally have owned one for over a decade and while the insert’s Velcro has worn out, I replaced it and gave it new life. I don’t want to sound vain, but the Billingham Hadley really is a classy camera bag and you can be proud to tote it around. Coming in at $240 dollars it’s not cheap, but my daddy says, “good things are not cheap and cheap things are not good”. Hey you only live one. Works with Xpro, XE1 & XE2.

#8 Cable release: It’s not a big deal until you go to need one. Shooting fireworks, long shutter speeds in front of waterfalls, or macro work the cable release is part and parcel to the whole reason to mount the camera on a tripod. Sure you could set the timer to 2 seconds, but nothing connects to you to your camera more than a cloth sheathed 12” of wire. The Nikon AR-3 is a high quality shutter release that has been around for ever, it’s locking so you can keep the shutter open for hours if need be. It’s a simple design, that wont break the bank and once again, it’s proven quality. Works with Xpro, XE1 & XE2.

#9 Extra Battery: Get one. You’re going to need it. The Xpro1 is only good for about 225 to 300 shots before it dies. When it goes, it goes fast. It may read two bars, but that really means you have about 20 shots left. I don’t complain, I just keep an extra battery in my bag. So get one, keep it charged and keep it in your bag. This battery works with Xpro, XE1 & XE2.

I hope this helps. Feel free to share you own suggestions.